Order Products : sales@su-jiao.com
CERTENE™ PBM-12NB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cUuXLc_CERTENE-PBM-12NB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBM-12 is a certified prime grade Medium-Impact INJECTION MOLDING specially designed for applications requiring good impact resistance at low temperatures. PBM-12 features very good processability, medium-high flow for fast mold filling, very good dimensional stability, excellent heat resistance, and optimal balance of mechanical properties. PBM-12 typical applications include automotive parts and interior trimming, appliance parts, tackle boxes, gun and tool cases, toys, industrial components, caps, closures and housewares. Recommended processing temperature is between 210° - 220°C. PBM-12 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and with most international regulations concerning the use of Polypropylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Injection Molded) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, Injection Molded) | 13 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 1020 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 85.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 140 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEOFLON™ EP-620 | DAIKIN AMERICA, INC. | ETFE | NEOFLON™ |
| Axiall PVC 3802 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Cheng Yu N66C1 | Cheng Yu Plastic Company Limited | Nylon 66 | Cheng Yu |
| ETILGUM ME/45 2Z | Crosspolimeri S.p.A. | TPE | ETILGUM |
| Braskem PE LDF6522 | Braskem IDESA | LDPE | Braskem PE |
