Order Products : sales@su-jiao.com
Alkatane™ HD0690
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkatane™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cU7NH6_Alkatane-HD0690.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Alkatane™ HD0690 is an injection moulding grade of High Density Polyethylene with a good balance between flow and impact resistance. Alkatane™ HD0690 is intended for use in the production of high quality mouldings such as crates and bins. Addition of a UV stabiliser should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 48.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D638 |
| Flexural Modulus | 100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-30°C) | 40 | J/m | ASTM D256A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® TW341 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Wondel® P PR0M6 | Nanjing Julong Engineering Plastics Co., LTD | PP, Unspecified | Wondel® P |
| HiFill® PBT 1225 A | Techmer Engineered Solutions | PBT | HiFill® |
| Latigea B01 I8 | LATI S.p.A. | PLA | Latigea |
| Sylvin 6226-83 White 1537 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
