Order Products : sales@su-jiao.com
RTP 205.3 TFE 5
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cSHiBP_RTP-205-3-TFE-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.43 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.30 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.70 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 9650 | MPa | ASTM D638 |
| Tensile Strength | 172 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 3.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 9650 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 262 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 96 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1100 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 243 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 274 to 293 | °C | |
| Middle Temperature | 274 to 293 | °C | |
| Front Temperature | 274 to 293 | °C | |
| Mold Temperature | 66.0 to 107 | °C | |
| Injection Pressure | 83.0 to 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SBF3748 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| FHR Polypropylene 11R12A | Flint Hills Resources, LP | PP Homopolymer | FHR Polypropylene |
| FERREX® GPP20CS42BK | Ferro Corporation | PP, Unspecified | FERREX® |
| Geon™ Vinyl Flexible R312AE | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Rotuba CAP CP808 (12% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
