Order Products : sales@su-jiao.com
Epoxies, Ect. 60-7158
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cRHooO_Epoxies-Ect-60-7158.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UV Cure 60-7158 is a UV Curable Epoxy Adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -40.0 to 135 | °C | |
| Thixotropic Index | 5.30 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Clear/Transparent | ||
| Solids Content | 100 | % | |
| Density (25°C) | 1.10 | g/cm³ | |
| Viscosity (25°C) | 20 | Pa·s | |
| Shelf Life (40°C) | > 1 | month |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 82 | ||
| Tensile Strength | 26.2 | MPa | |
| Electric Strength | 17 | kV/mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| polyvic® E-1836- PL PE | Unipack Plasindo | PVC, Unspecified | polyvic® |
| SLOVAMID® 66 GB 30 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| TRIBIT® 1500GN20 | Samyang Corporation | PBT | TRIBIT® |
| Anjaflam® 450-FR/GF15 | Almaak International GmbH | PBT | Anjaflam® |
| ASTALAC™ ABS MGF10E | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
