Order Products : sales@su-jiao.com
Shanghai Ofluorine PVDF Z-1
| Category: | PVDF , Polyvinylidene Fluoride |
| Manufacturer: | Shanghai Ofluorine Chemical Technology Co., Ltd |
| Trademark: | Shanghai Ofluorine PVDF |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cQ1SPs_Shanghai-Ofluorine-PVDF-Z-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Low melt viscosity, more suitable for injection molding. Z-1 PVDF as raw materials, the finished products has excellent mechanical strength and flexibility. It can not be eroded by acid, alkali, strong oxidant, halogens. Good durability to aliphatic hydrocarbons, aromatic hydrocarbons, alcohol, aldehyde etc. In the work of hydrochloric acid, nitric acid, sulfuric acid, dilute alkali liquor, dense alkali liquor(40%) and 100deg.C, which keep stable. Others, Z-1 PVDF finished products has the properties of gamma-Ray resistant, UV resistant, and stability in wide temperature range. Application: Be used in manufacturing PVDF valves, PVDF teller rosette ring, PVDF pall ring etc, semi-conductor industry, such as ultrapure water field etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.77 to 1.79 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 15 to 25 | g/10 min | ASTM D1238 |
| Water Absorption (Equilibrium) | < 0.050 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 to 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield, 23°C | > 40.0 | MPa | |
| Break, 23°C | > 25.0 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield, 23°C | > 10 | % | |
| Break, 23°C | > 20 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature 3 | 165 to 171 | °C | ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® 22LH-NBK4 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| U-polymer LM-8503-10 | UNITIKA Plastics Division | Polyarylate | U-polymer |
| EverGlide® MB5550P-WC | Polymer Dynamix | XLPE | EverGlide® |
| FERREX® GPP30CC38UL GRAY | Ferro Corporation | PP Homopolymer | FERREX® |
| RTP 205 TFE 13 SI 2 UV | RTP Company | Nylon 66 | RTP |
