Order Products : sales@su-jiao.com
Dural 205JB CLEAR 0003
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Dural |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cONah9_Dural-205JB-CLEAR-0003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dural 205JB Clear 0003 is a non-toxic, high flow, high impact clear rigid PVC composition primarily designed for injection blow molding. This compound provides high thermal stability for the injection blow molding of articles such as vials and bottles. Its relatively high heat distortion properties make it suitable for parts which will be exposed to a wide range of ambient conditions. Dural 205JB Clear 0003 is produced from FDA sanctioned ingredients |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 to 1.32 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 14 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec, 3.18 mm) | 72 to 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2240 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 1.91 mm | 42.7 | MPa | |
| Break, 1.91 mm | 28.6 | MPa | |
| Tensile Elongation (Break, 1.91 mm) | 10 | % | ASTM D638 |
| Flexural Modulus (3.18 mm) | 2420 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 910 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 68.3 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 177 to 182 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SGH2815UV | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| elitel UE3370 | UNITIKA Plastics Division | TPC-ET | elitel |
| Sylvin 6034-85 Clear Yellow 4112 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Hylex® P1010L2 | Entec Polymers | PC | Hylex® |
| 3M™ Dyneon™ Fluoroelastomer FE 5520 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
