Order Products : sales@su-jiao.com
AEI TP543C
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | AEI Compounds Limited |
| Trademark: | AEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cO3PPH_AEI-TP543C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic, low-smoke, halogen-free, flame retardant compound for cable insulation and sheathing. A flame-retardant low-smoke thermoplastic compound which has been specially developed to meet the requirements of limited toxic/corrosive fume emission, and having high fire retardance as indicated by a high oxygen index. TP543C has been specially developed to comply with the requirements of BS7655 Section 6 for types LTS1,2,3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 332 part 1 and 3 fire tests. TP543C is available in the following versions:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.54 | g/cm³ | BS 2782 620A |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 7.0 | g/10 min | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 13.0 | MPa | IEC 60811-1-1 |
| Tensile Strain | |||
| Fracture | 170 | % | IEC 60811-1-1 |
| Fracture, -30°C 1 | 50 | % | IEC 60811-1-4 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength (100°C, 168 hr) | 12 | % | IEC 60811-1-2 |
| Change in Tensile Strain at Break (100°C, 168 hr) | -12 | % | IEC 60811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation (90°C) | 35 | % | IEC 60811-3-1 |
| Cold bending (-30°C) | pass | IEC 60811-1-4 | |
| Temperature index | > 300 | °C | ISO 4589-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Constant - Ki | IEC 60502 | ||
| 20°C | 7.7E+9 | ohms·cm | IEC 60502 |
| 90°C | 5.7E+7 | ohms·cm | IEC 60502 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Acid Gas Evolution | % | IEC 60754-1 | |
| Tear Strength | 6 | N/mm | BS 6469 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 160 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 41 | % | ISO 4589-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 130 | °C | |
| Cylinder Zone 3 Temp. | 140 | °C | |
| Cylinder Zone 4 Temp. | 150 | °C | |
| Melt Temperature | < 170 | °C | |
| Die Temperature | 160 | °C |
| Extrusion instructions |
|---|
| An extruder with an L/D ratio (length/diameter) of 15-24 and an extruder screw with a compression ratio 1.5:1 or less are recommended. |
| Note Message | |
|---|---|
| 1 . | pass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® XLR® 640 A/B | Wacker Chemie AG | Silicone | POWERSIL® |
| Globalene® ST611M | Lee Chang Yung Chemical Industry Corp. | PP Random Copolymer | Globalene® |
| Envirez® 1807 | Ashland Performance Materials | Polyester, TS | Envirez® |
| StarFlex® 7027-1000 | Star Thermoplastic Alloys & Rubbers, Inc. | TPE | StarFlex® |
| PENTALLOY BP H natural | PENTAC Polymer GmbH | Nylon 6+PP | PENTALLOY BP |
