Order Products : sales@su-jiao.com

KW Plastics KWR621 FDA

Category:	PP Copolymer , Polypropylene Copolymer
Manufacturer:	KW Plastics
Trademark:	KW Plastics
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cNbYTb_KW-Plastics-KWR621-FDA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Copolymer Polypropylene Post-Consumer Resin Injection Molding CHARACTERISTICS Good impact resistance. Available as mixed color. Food grade PP, in compliance with FDA NOL suitable for use in the fabrication of disposable food service items, such as disposable cutlery, soup containers, and hot and cold drink cups and the manufacture of reusable crates or pallets for holding relatively large quantities of fresh, unwrapped product and shelled eggs under room temperature and below (Conditions of Use C-G) in levels up to 100% content.

Message

Copolymer Polypropylene Post-Consumer Resin
Injection Molding

CHARACTERISTICS
Good impact resistance. Available as mixed color. Food grade PP, in compliance with FDA NOL suitable for use in the fabrication of disposable food service items, such as disposable cutlery, soup containers, and hot and cold drink cups and the manufacture of reusable crates or pallets for holding relatively large quantities of fresh, unwrapped product and shelled eggs under room temperature and below (Conditions of Use C-G) in levels up to 100% content.

General Information
Recycled Content	Yes
Features	Copolymer Food Contact Acceptable Good Impact Resistance
Uses	Crates Cups Disposable Tableware Food Containers Pallets
Agency Ratings	FDA Food Contact, Unspecified Rating
RoHS Compliance	RoHS Compliant
Appearance	Colors Available
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.915	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	10	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	21.4	MPa	ASTM D638
Tensile Elongation (Yield)	10	%	ASTM D638
Flexural Modulus	1030	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	91	J/m	ASTM D256

Resin Grade	Manufacturer	Category	Trademark
RTP 1387 TFE 5	RTP Company	PPS	RTP
Staramide ACF2	Eurostar Engineering Plastics	Nylon 66	Staramide
Andur 7003 AP-F	Anderson Development Company	PUR-Ether/TDI	Andur
Hanwha Total PP TB52L	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, Unspecified	Hanwha Total PP
PENTAMID AB MK30 E H schwarz	PENTAC Polymer GmbH	Nylon 66/6	PENTAMID AB