Order Products : sales@su-jiao.com
Braskem PE SGD4960
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem America Inc. |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cMzylb_Braskem-PE-SGD4960.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SGD4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.962 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.70 | g/10 min | |
| 190°C/21.6 kg | 50 | g/10 min | |
| Environmental Stress-Cracking Resistance 1 | ASTM D1693 | ||
| 50°C, 2.00 mm, 10% Igepal, Compression Molded, F50 | 19.0 | hr | |
| 50°C, 2.00 mm, 100% Igepal, Compression Molded, F50 | 24.0 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 32.0 | MPa | |
| Break, Compression Molded | 22.0 | MPa | |
| Flexural Modulus - 1% Secant (Compression Molded) | 1730 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 89 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 85.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 2 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | > 96 | % | ASTM D6866 |
| Note Message | |
|---|---|
| 1 . | 0.3 mm notched-plaques |
| 2 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultraform® N 2320 0035 LEV | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| NuSil CV2-1147 | NuSil Technology | Silicone | NuSil |
| ALTECH® PA6 A 2015/321 GF15 UV IM | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| COPEC® CC7OCZ (Series: VS/AD1) | KRAIBURG TPE | TPE | COPEC® |
| Petrotene® PP A3 E8 CNZ0018 PH346 MSP | Petropol Industry and Trade of Polymers LTDA | PP Homopolymer | Petrotene® PP |
