Order Products : sales@su-jiao.com

NuSil MED-4011

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cL9gY5_NuSil-MED-4011.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: FLOWABLE

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: FLOWABLE

General Information
Features	Good Flow Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0
Post Cure Time (150°C)	1.0	hr

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.09	g/cm³
Viscosity
-- ¹	1.6	Pa·s
-- ²	110	Pa·s
Curing Time (150°C)	0.050	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	25
Tensile Strength	4.65	MPa
Tensile Elongation at Break	530	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
WanBlend® WHT-HF8685	Wanhua Chemical Group Co., Ltd.	TPU-Polyether	WanBlend®
EPO-TEK® 320NC-2	Epoxy Technology Inc.	Epoxy	EPO-TEK®
ESTACARB PC 2020 GF V0	Cossa Polimeri S.r.l.	PC	ESTACARB
SD POLYCA™ SI8001H	Sumika Styron Polycarbonate Limited	PC	SD POLYCA™
Sylvin 8621-90UV Clear 876	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin