Order Products : sales@su-jiao.com
Triax® 1120
| Category: | ABS+Nylon , Acrylonitrile Butadiene Styrene + Nylon |
| Manufacturer: | INEOS Styrolution Group GmbH |
| Trademark: | Triax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cKR9Ex_Triax-1120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Triax 1120 resin is an ABS (Acrylonitrile Butadiene Styrene)/Nylon 6 alloy for injection molding. It is a semicrystalline thermoplastic with excellent processibility, good chemical resistance, good fatigue performance, and excellent abrasion characteristics. Triax 1120 resin exhibits a good balance of impact strength and flow properties. Typical applications include housings, shrouds and handles for components of lawn and garden equipment, power tools, appliances, and sporting goods. Automotive applications include fasteners and interior functional components, housings, and shrouds. As with any product, use of Triax 1120 resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.06 | 1.06 | g/cm³ | ASTM D792 |
| Specific Volume | 0.940 | 0.940 | cm³/g | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 | 1.0 | % | ASTM D955 |
| Water Absorption | ASTM D570 | |||
| 23°C, 24 hr | 1.1 | 1.1 | % | ASTM D570 |
| Saturated, 23°C | 4.3 | 4.3 | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | 90 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2030 | -- | MPa | ASTM D638 |
| Tensile Strength (Yield) | 43.4 | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 140 | 290 | % | ASTM D638 |
| Flexural Modulus | 2070 | 1170 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 75.2 | 56.9 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C, 3.18 mm | 80 | 80 | J/m | ASTM D256 |
| -40°C, 6.35 mm | 69 | 75 | J/m | ASTM D256 |
| 23°C, 3.18 mm | 800 | 800 | J/m | ASTM D256 |
| 23°C, 6.35 mm | 750 | 750 | J/m | ASTM D256 |
| Instrumented Dart Impact | ASTM D3763 | |||
| -40°C, 2.54 mm, Total Energy | 47.5 | 59.7 | J | ASTM D3763 |
| 23°C, 2.54 mm, Total Energy | 42.0 | 48.8 | J | ASTM D3763 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, unannealed, 3.18mm | 90.0 | 87.8 | °C | ASTM D648 |
| 0.45 MPa, unannealed, 6.35mm | 97.2 | 96.1 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.18mm | 65.0 | 62.2 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 6.35mm | 73.9 | 72.2 | °C | ASTM D648 |
| Vicat Softening Temperature | 197 | 170 | °C | ASTM D1525 1 |
| CLTE - Flow | ASTM D696 | |||
| -40 to 22°C | 9.9E-5 | 1.1E-4 | cm/cm/°C | ASTM D696 |
| 22 to 83°C | 1.5E-4 | 1.4E-4 | cm/cm/°C | ASTM D696 |
| RTI Elec (1.57 mm) | 110 | 110 | °C | UL 746 |
| RTI Imp (1.57 mm) | 65.0 | 65.0 | °C | UL 746 |
| RTI (1.57 mm) | 105 | 105 | °C | UL 746 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 8.3E+15 | 3.2E+13 | ohms | ASTM D257 |
| Volume Resistivity 2 | 9.7E+15 | 9.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength 3(23°C, 1.57 mm, in Oil) | 17 | 15 | kV/mm | ASTM D149 |
| Dielectric Constant 4(1 MHz) | 3.50 | 3.50 | ASTM D150 | |
| Dissipation Factor 5(1 MHz) | 0.024 | 0.039 | ASTM D150 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.57 mm | HB | HB | UL 94 | |
| 3.18 mm | HB | HB | UL 94 |
| Optical | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Gardner Gloss | ASTM D523 | |||
| 20° | 78 | 78 | ASTM D523 | |
| 60° | 91 | 91 | ASTM D523 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.15 - 0.35 | % | |
| Suggested Shot Size | 50 - 70 | % | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 232 - 266 | °C | |
| Middle Temperature | 232 - 266 | °C | |
| Front Temperature | 232 - 266 | °C | |
| Nozzle Temperature | 249 - 260 | °C | |
| Processing (Melt) Temp | 238 - 271 | °C | |
| Mold Temperature | 37.8 - 65.6 | °C | |
| Injection Pressure | 41.4 - 82.7 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² | |
| Cushion | < 3.18 | mm | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Injection instructions |
|---|
| Hold Pressure: 30 to 50% of Injection PressureScrew Speed: Moderate |
| Note Message | |
|---|---|
| 1 . | 标准 B (120°C/h), 压 力1 (10N) |
| 2 . | Tinfoil Electrodes |
| 3 . | Method A (short time) |
| 4 . | Tinfoil Electrodes |
| 5 . | Tinfoil Electrodes |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Teflon® PTFE 62XT X | DuPont Fluoropolymers | PTFE | Teflon® PTFE |
| Sinvicomp SRP5608 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| INSTRUC PA66IM | Infinity LTL Engineered Compounds | Nylon 66 | INSTRUC |
| Jampilen RCXP599 | Jam Polypropylene Company | PP Random Copolymer | Jampilen |
| POLYCOMPO PE SP2520 | POLYCOMPO Co.,Ltd. | LLDPE | POLYCOMPO PE |
