Order Products : sales@su-jiao.com
Di-Pak™ E-4701-5
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Hapco Inc. |
| Trademark: | Di-Pak™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cK1f3X_Di-Pak-E-4701-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DI-PAK E-4701, E-4951 and E-4501 Easily pourable, thermally conductive, shock resistant potting compounds that are ideally suited for low and high production applications. This series of DI-PAK products reduce rejects by exhibiting extremely low stress on potted components. All three of the above DI-PAK E products are flame retardant and meet UL 94V-0 requirements. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.050 to 0.15 | % | ASTM D2566 |
| Weight - per cubic inch | 25 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature | 125 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 5.0 | min | ASTM D2971 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Shock Test | Pass |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 6.89 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 | |
| Unnotched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 3.5E-4 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.42 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.4E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 16 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 4.40 | ||
| 100 kHz | 4.10 | ||
| Dissipation Factor (25°C, 100 kHz) | 0.073 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 250, Mix Ratio by Volume: 150 | ||
| Thermoset Mix Viscosity (25°C) | 9200 | cP | ASTM D4878 |
| Demold Time (21°C) | 20 to 35 | min |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES AC-80/GB/20/M BK | Techmer Engineered Solutions | Acetal (POM) Copolymer | TES |
| AMTOPP BFP35 | Inteplast Group | PP, Unspecified | AMTOPP |
| Arak LLDPE HD5211EA | Shazand (Arak) Petrochemical Corporation | HDPE | Arak LLDPE |
| DENILUB Z 30G 3TF | Vamp Tech | PPA | DENILUB |
| POCAN® B 3235 POS151 000000 | LANXESS GmbH | PBT | POCAN® |
