Order Products : sales@su-jiao.com
PPR ABSPC02
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Premier Plastic Resins, Inc. |
| Trademark: | PPR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cFEGMG_PPR-ABSPC02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPR ABSPC02 is a polycarbonate acrylonitrile butadiene styrene (PC ABS) product,. It can be processed by injection molding and is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 3.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 52.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 100 | % | ASTM D638 |
| Flexural Modulus - Tangent | 2410 | MPa | ASTM D790 |
| Flexural Strength | 82.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 530 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 107 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 88.0 - 99.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 238 - 271 | °C | |
| Middle Temperature | 249 - 282 | °C | |
| Front Temperature | 254 - 288 | °C | |
| Nozzle Temperature | 254 - 288 | °C | |
| Processing (Melt) Temp | 271 - 304 | °C | |
| Mold Temperature | 82.0 - 96.0 | °C | |
| Injection Pressure | 55.0 - 97.0 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 41.0 - 83.0 | MPa | |
| Back Pressure | 0.00 - 1.00 | MPa | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Screw Speed: Slow-ModerateDecompression: 3.81 to 7.6 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ELASTICHEM™ 9011TX-02 | Colorite Polymers | PVC Elastomer | ELASTICHEM™ |
| GAPEX® RPP45EA93GY | Ferro Corporation | PP, Unspecified | GAPEX® |
| ELIX™ ABS P2L-AT | ELIX Polymers, S. L. | ABS | ELIX™ ABS |
| Hostaform® S 9364 WS 10/1570 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Thermec N™ 4340R45F4 | Technical Polymers, LLC | PPA | Thermec N™ |
