Order Products : sales@su-jiao.com
Desmoderm® KE 072
| Category: | PUR-Ether , Polyurethane (Polyether based) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmoderm® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cEK490_Desmoderm-KE-072.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Desmoderm KE 072 Granular is a one-component polyether urethane based on an aromatic diisocyanate. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity 1 | DIN EN ISO 3219/A.3 | ||
| Tempered 5 hr, 120°C : 23°C | 4.00 to 60.0 | Pa·s | |
| Untempered : 23°C | 4.00 to 20.0 | Pa·s |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Light-Fastness | 4.00 to 5.00 | DIN 54004 | |
| Softening Range | 150 | °C |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 100 | µm | |
| Tensile Modulus - 100% (100 µm) | 5.00 to 6.00 | MPa | DIN 53504 |
| Tensile Strength | DIN 53504 | ||
| 100 µm | 35.0 to 45.0 | MPa | |
| 70°C, 100 µm 2 | 35.0 to 45.0 | MPa | |
| Tensile Elongation (Break, 100 µm) | 600 to 700 | % | DIN 53504 |
| Note Message | |
|---|---|
| 1 . | 20% solution in dimethylformamide |
| 2 . | after 14 days hydrolysis, 95% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDINYL A2 M20 V10 | ADDIPLAST | Nylon 66 | ADDINYL |
| Badamid® A70 | Bada AG | Nylon 66 | Badamid® |
| Badadur® PBT8 TM-Z1 | Bada AG | PBT | Badadur® |
| CONAPOXY® FR-1080 | Cytec Industries Inc. | Epoxy | CONAPOXY® |
| Cri-Line SP-510-55 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
