Index
About
Search
Contact Us
Order Products​ : sales@su-jiao.com

Santoprene™ 291-60B150

Category: TPV , Thermoplastic Vulcanizate
Manufacturer: ExxonMobil Chemical
Trademark: Santoprene™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: cDumxR_Santoprene-291-60B150.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
It is a pigable special thermoplastic vulcanized elastomer (TPV) in the thermoplastic elastomer (TPE) series. It is specially formulated for bonding with PC, ABS, PC/ABS and PMMA, and is suitable for applications requiring a combination of hard/soft materials. This brand of Sanduping TPV is a shear rate dependent product that can be processed on conventional thermoplastic injection molding or extrusion molding equipment. Can be recycled online.
General Information
Features
  • Shock absorption
  • Recyclable materials
  • Adhesiveness
  • Ozone resistance
  • Good chemical resistance
  • Oil resistance
Uses
  • Kitchen utensils
  • Large household appliances and small household appliances
  • Electrical appliances
  • Active hinge
  • Home appliance components
  • Frame
  • Seals
  • Fatigue elimination supplies
  • Parts under the hood of a car
  • Application in Automobile Field
  • Soft handle
  • Mobile phone
  • Sporting goods
  • Consumer goods application field
  • Bonding
  • Bonding resin
RoHS Compliance
  • RoHS compliance
Appearance
  • Natural color
Forms
  • Particle
Processing Method
  • Multiple injection molding
  • Co-extrusion molding
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.06g/cm³ASTM D792, ISO 1183
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shaw A, 15 seconds, 23°C, 2.00mm)65ISO 868
ElastomersNominal ValueUnitTest Method
Tensile Stress - Across Flow (100% Strain, 23°C)2.10MPaASTM D412, ISO 37
Tensile Strength - Across Flow (Break, 23°C)8.00MPaASTM D412, ISO 37
Tensile Elongation - Across Flow (Break, 23°C)540%ASTM D412, ISO 37
Tear Strength - Across Flow
    23°C 128.0kN/mASTM D624
    23°C 228kN/mISO 34-1
Compression Set
    23°C, 22 hr 334%ASTM D395B
    70°C, 22 hr 462%ASTM D395B
    23°C, 22 hr 534%ISO 815
    70°C, 22 hr 662%ISO 815
AgingNominal ValueUnitTest Method
Change in Tensile Strength in Air (100°C, 168 hr)0.0%ASTM D573, ISO 188
Change in Ultimate Elongation in Air (100°C, 168 hr)-11%ASTM D573, ISO 188
Change in Durometer Hardness in Air (support a, 100 c, 672 hr)-2.0ASTM D573, ISO 188
Change in Mass in Air (100°C, 168 hr)-1.1%ASTM D573
Change in Mass in Air (100°C, 168 hr)-1.1%ISO 188
Change in Volume in Air (100°C, 168 hr)-1.2%ASTM D573
Change in Volume in Air (100°C, 168 hr)-1.2%ISO 188
Change in Tensile Strength ASTM D471, ISO 1817
    23°C, 24 hr, in IRM 903 oil -4.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 10% sodium hypochlorite -16%ASTM D471, ISO 1817
    23°C, 168 hr, in 10% hydrochloric acid -20%ASTM D471, ISO 1817
    23°C, 168 hr, in 15% sodium chloride -18%ASTM D471, ISO 1817
    23°C, 168 hr, in 50% sodium hydroxide -22%ASTM D471, ISO 1817
    23°C, 168 hr, in 50% ethanol -65%ASTM D471, ISO 1817
    23°C, 168 hr, at 90% relative temperature -11%ASTM D471, ISO 1817
    23°C, 168 hr, in series detergent -20%ASTM D471, ISO 1817
    38°C, 168 hr, at 90% relative temperature -16%ASTM D471, ISO 1817
Change in Ultimate Elongation ASTM D471, ISO 1817
    23°C, 24 hr, in IRM 903 oil -4.0 -4.0 -4.0 -4.0 -4.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 10% sodium hypochlorite -4.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 10% hydrochloric acid -10%ASTM D471, ISO 1817
    23°C, 168 hr, in 15% sodium chloride -6.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 50% sodium hydroxide -18%ASTM D471, ISO 1817
    23°C, 168 hr, in 50% ethanol -66%ASTM D471, ISO 1817
    23°C, 168 hr, at 90% relative temperature -10%ASTM D471, ISO 1817
    23°C, 168 hr, in series detergent -7.0%ASTM D471, ISO 1817
    38°C, 168 hr, at 90% relative temperature -9.0%ASTM D471, ISO 1817
Change in Durometer Hardness (Support A, 23°C, 168 hr, in deionized water)-1.0ASTM D471, ISO 1817
Change in Mass ASTM D471
    23°C, 168 hr, in 10% sodium hypochlorite 0.60%ASTM D471
    23°C, 168 hr, in 10% hydrochloric acid 0.40%ASTM D471
    23°C, 168 hr, in 15% sodium chloride 0.10%ASTM D471
    23°C, 168 hr, in 50% sodium hydroxide 0.10%ASTM D471
    23°C, 168 hr, in 50% ethanol 6.5%ASTM D471
    23°C, 168 hr, in 95% relative temperature 0.0%ASTM D471
    23°C, 168 hr, in series detergent 0.10%ASTM D471
    38°C, 168 hr, in 95% relative temperature 0.60%ASTM D471
Change in Mass ISO 1817
    23.0°C, 168 hr, in 95% relative temperature 0.0%ISO 1817
    23.0°C, 168 hr, in 15% sodium chloride 0.10%ISO 1817
    23.0°C, 168 hr, in series detergent 0.10%ISO 1817
    23.0°C, 168 hr, in 50% sodium hydroxide 0.10%ISO 1817
    23.0°C, 168 hr, in 10% hydrochloric acid 0.40%ISO 1817
    38.0°C, 168 hr, in 95% relative temperature 0.60%ISO 1817
    23.0°C, 168 hr, in 10% sodium hypochlorite 0.60%ISO 1817
    23.0°C, 168 hr, in 50% ethanol 6.5%ISO 1817
Change in Volume
    23°C, 168 hr, 95% relative humidity 0.0%ASTM D471
    23°C, 168 hr, in 10% sodium hypochlorite 0.60%ASTM D471, ISO 1817
    23°C, 168 hr, in 10% hydrochloric acid 0.40%ASTM D471
    23°C, 168 hr, in 15% sodium chloride 0.60%ASTM D471
    23°C, 168 hr, in 50% sodium hydroxide 0.20%ASTM D471
    23°C, 168 hr, in 50% ethanol 6.8%ASTM D471, ISO 1817
    23°C, 168 hr, in series detergent 0.10%ASTM D471, ISO 1817
    38°C, 168 hr, 95% relative humidity 0.60%ASTM D471
    23°C, 168 hr, in 10% hydrochloric acid 0.40%ISO 1817
    23°C, 168 hr, in 15% sodium chloride 0.60%ISO 1817
    23°C, 168 hr, in 50% sodium hydroxide 0.20%ISO 1817
    23°C, 168 hr, at 95% relative humidity 0.0%ISO 1817
    38°C, 168 hr, at 95% relative humidity 0.60%ISO 1817
Additional Information
如果适用，这是基于扇形浇口注塑成型的平板测试结果。拉伸强度、伸长率和拉伸应力沿垂直流动方向测定 - ISO 1 型，ASTM die C。25% 形变时的永久压缩变形。从埃克森美孚欧洲分支机构直接购买的所有产品都符合 REACH 法规。 对于埃克森 美孚未进口至欧洲的产品，用户应自行评估其是否满足 REACH 法规。
Legal statement
未经埃克森美孚化工书面允许，这种产品包括其产品名称，不得在任何医疗应用领域予以使用或有关详细的产品监管信息，请联系客户服务。
Injection instructions
Santoprene TPV与乙缩醛和PVC不相容。更多信息请参见《291-XXB150快速加工参考手册》。
Note Message
1 .C mould
2 .Method B, right-angle specimen (cut)
3 .Type 1
4 .Type 1
5 .Type a
6 .Type a
Resin Grade Manufacturer Category Trademark
Sinvicomp SIM4107 Teknor Apex Asia Pacific PTE. LTD. PVC, Flexible Sinvicomp
AURAPENE PPUFBK35 Aurora Manufacturing Ltd TPO AURAPENE
Hanwha Total PP CI72W HANWHA TOTAL PETROCHEMICALS Co., Ltd. PP, High Crystal Hanwha Total PP
OTECH TPE OTE7532 - Power Jacket OTECH Corporation TPE OTECH TPE
TechnoMid PA6 S GF 10 M 20 TechnoCompound GmbH Nylon 6 TechnoMid

TEL: +86-21-58958519 Email:sales@su-jiao.com

No. 215, Lianhe North Road, Fengxian District, Shanghai, China​， COPYRIGHT SUSHENG COMPANY RIGHTS RESERVED