Order Products : sales@su-jiao.com
Innothane® IE-90A
| Category: | TSU-Ether , Polyurethane Thermoset Elastomer, Polyether Based |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | Innothane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cCoVi0_Innothane-IE-90A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IE-90A is a tough, semi-flexible polyurethane elastomer formulated for hand-batch or vacuum assisted processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Hardener | 1.04 | g/cm³ | |
| Cured | 1.12 | g/cm³ | |
| Base Resin | 1.20 | g/cm³ | |
| Molding Shrinkage - Flow | 0.10 to 0.50 | % | ASTM D2566 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 100 Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 38 Mix Ratio by Volume: 33 | ||
| Demold Time | 240 to 480 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 0.10 | Pa·s | |
| 25°C 2 | 0.98 | Pa·s | |
| 25°C 3 | 1.5 | Pa·s | |
| Curing Time (25°C) | 1.7E+2 | hr | |
| Gel Time | 7.0 to 13 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 80 to 90 | ASTM D2240 | |
| Tensile Strength | 12.1 | MPa | ASTM D638 |
| Tensile Elongation at Break | 180 | % | ASTM D638 |
| Tear Strength | 37.7 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Mixed |
| 3 . | Hardener |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Small Boss RPVC03 | Tongxiang Small Boss Special Plastic Products Co., Ltd. | PVC, Rigid | Small Boss |
| THERMOLAST® A TA6AOZ (Series: UV/AD1) | KRAIBURG TPE | TPE | THERMOLAST® A |
| Celanex® 3309HRT | Celanese Corporation | PBT | Celanex® |
| Delta N66R-1MOSPO HS | Delta Polymers | Nylon 66 | Delta |
| Electroblend® PBT-1801 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PBT | Electroblend® |
