Order Products : sales@su-jiao.com
Maxxam™ FR PE CONC 1 NAT
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Maxxam™ FR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cAGUtm_Maxxam-FR-PE-CONC-1-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Maxxam™FR flame retardant polyolefin polymers and masterbatches meet the strict flammability requirements set by the industry, including UL 94V-2,V-0 and 5VA performance grades of UL Laboratory. In addition, the various polymers in the Maxxam FR combination are also suitable for high relative temperature index (RTI) levels. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.58 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(190°C/2.16 kg) | 2.0 - 5.0 | g/10 min | ASTM D1238 |
| Additional Information |
|---|
| MAXXAM FR PO 浓缩 62给低密度和高密度聚乙烯带来良好的阻燃性。 因为聚乙烯的种类太多，很难预测达到特定可燃性标准所需要的稀释比。对于起点配方我们建议：4-7份（重量）低密度聚乙烯，5份（重量）高密度聚乙烯- 到1份Concentrate 62。当此浓度以适当比例稀释时，制成材料可以达到与UL-94 V-2或VTM-2要求等效的阻燃性。在LDPE 薄膜 @ 4-8 mil 薄膜中使用8% PO CONC 62可达到BFD IX-1和NFPA 701性能标准 / 在厚度大于等于1.5mm的PE @ 15-30%中可达到V-2性能标准。对物理属性的影响最小。 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuman ABS 710 | Shuman Plastics, Inc. | ABS | Shuman ABS |
| NORYL™ FE1520PW resin | SABIC Innovative Plastics Europe | PPE+PS | NORYL™ |
| Comai 200-1 NT | Comai Ltda | PP Homopolymer | Comai |
| Ferro PP TPP20AD72HB-NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| KIBISAN® PN-107 L125 FG | CHI MEI CORPORATION | SAN | KIBISAN® |
