Order Products : sales@su-jiao.com

Alathon® L5008

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	LyondellBasell Industries
Trademark:	Alathon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	c7Ey1x_Alathon-L5008.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Alathon L5008 is a bimodal, high molecular weight, high density polyethylene resin with excellent processing characteristics. L5008 is selected by customers for demanding pressure pipe applications.
When L5008 is combined with an Equistar approved black at the correct loading, this compound meets the following standards:

Plastics Pipe Institute (PPI) PE 4608 per PPI TR-3

Plastics Pipe Institute (PPI) PE 3408 per PPI TR-4

PE80 per ISO 9080 & ISO 12162

ASTM D3350 Cell Classification PE445564C

Chemical Resistance per ASTM D2513

NSF Standard 14 and Standard 61 for Potable Water Pipe and Fittings

NSF Standard 358-1 for PE Pipe and Fittings for "Geothermal" Heat Pump Systems

General Information
Features	Bimodal Molecular Weight Distribution Copolymer Good Processability High Molecular Weight
Uses	Fittings Piping
Agency Ratings	ASTM D 3350 PE445564C ISO 12162 PE 80 ISO 9080 PE 80 NSF 14 NSF 358-1 NSF 61 PPI PE-3408 PPI PE-4608 PPI TR-3 PPI TR-4
Forms	Pellets
Processing Method	Extrusion Injection Molding Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.949	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.070	g/10 min
190°C/21.6 kg	16	g/10 min

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	24.4	MPa
Break	34.3	MPa
Tensile Elongation (Break)	640	%	ASTM D638
Flexural Modulus - 2% Secant	972	MPa	ASTM D790
Hydrostatic Design Basis			ASTM D2837
23°C	11.0	MPa
60°C	6.89	MPa

Additional Information	Nominal Value	Unit	Test Method
DSC Induction Temperature	267	°C	ASTM D3350
PENT (80°C) ¹	> 100	hr	ASTM F1473

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	68.0	°C	ASTM D648

Note Message
1 .	2.4 MPa

Resin Grade	Manufacturer	Category	Trademark
POLYLAN AG12A0	POLYMA Kunststoff GmbH & Co. KG	ABS	POLYLAN
Spartech Polycom 3030-WB92	Spartech Polycom	PVC Alloy	Spartech
3M™ Dyneon™ Fluoroplastic PFA FLEX8502UHPZ	3M Advanced Materials Division	PFA	3M™ Dyneon™ Fluoroplastic
Aegis® H135MP	Honeywell	Nylon 6	Aegis®
DIC.PPS FZ-6600	DIC Corporation	PPS	DIC.PPS