Order Products : sales@su-jiao.com
FRAGOM PR/11
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bzpPUb_FRAGOM-PR-11.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine thermoplastic compounds. FRAGOM PR/11 is a flame retardant polyolefine thermoplastic compound having high temperature index and good oxygen index, suitable for electrical cables sheathing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.46 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 11 to 15 | g/10 min | ASTM D1238 |
| Water Absorption - 24 hr (100°C) | 18.0 | g/m² | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - 4h at 80°C -Penetratrion | 40 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Corrosive Gas in Smoke - pH | > 4.50 | IEC 60754-2 | |
| Halogen Content | < 0.200 | % | IEC 60754-1 |
| Temperature Index (Burning) 1 | 275 | °C | NES 715 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 160 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 93 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 13.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | 190 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 17 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -12 | % | IEC 60811 |
| Change in Tensile Stress | IEC 60811 | ||
| 23°C, 4 hr, in Gasoline | -20 | % | |
| 70°C, 4 hr, in SAE 20 Oil | -20 | % | |
| Change in Tensile Strain at Break | IEC 60811 | ||
| 23°C, 4 hr, in Gasoline | 3.0 | % | |
| 70°C, 4 hr, in SAE 20 Oil | 4.0 | % |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 33 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 130 | °C | |
| Cylinder Zone 3 Temp. | 140 | °C | |
| Cylinder Zone 4 Temp. | 155 | °C | |
| Die Temperature | 160 | °C |
| Note Message | |
|---|---|
| 1 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPAZ™ LB30 | Mando Advanced Materials Co., Ltd. | Nylon 6 | SEPAZ™ |
| Zhongfa PP ZF-YM | Yuyao Zhongfa Engineering Plastics Co. Ltd. | PP, Unspecified | Zhongfa |
| NYCOA NanoSEAL™ NS-8330 UV | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA NanoSEAL™ |
| Hy-Vin® XH79214 | INEOS Compounds | PVC, Flexible | Hy-Vin® |
| LNP™ VERTON™ NV004E compound | SABIC Innovative Plastics | PC+ABS | LNP™ VERTON™ |
