Order Products : sales@su-jiao.com
Garaflex™ O 9940 DWN-R NATURAL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | Garaflex™ O |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | byQlGg_Garaflex-O-9940-DWN-R-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARAFLEX-O 9940 DWN-R IS A PBB, PBBE & PBBO FREE, 125C DEGREE, FLAME RETARDED OLEFINIC THEMOPLASTIC ELASTOMER WITH EXCELLENT DRY AND WET ELECTRICAL STABILITY. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 - 1.32 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 50 - 56 | ASTM D2240 | |
| Shaw D, 15 seconds | 41 - 47 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 15.2 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 550 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1 | UL Unspecified | ||
| 136°C, 168 hr | 0.0 | % | UL Unspecified |
| 158°C, 168 hr | 0.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2 | UL Unspecified | ||
| 136°C, 168 hr | -5.0 | % | UL Unspecified |
| 158°C, 168 hr | -10 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.40 | ASTM D150 | |
| Dissipation Factor (23°C, 1 MHz) | 4.0E-4 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 35 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 171 | °C | |
| Cylinder Zone 3 Temp. | 177 | °C | |
| Cylinder Zone 4 Temp. | 182 | °C | |
| Cylinder Zone 5 Temp. | 188 | °C | |
| Adapter Temperature | 182 | °C | |
| Melt Temperature | 182 - 191 | °C | |
| Die Temperature | 182 | °C |
| Extrusion instructions |
|---|
| Screens: 20/40/100/20Screw Design: Standard Olefin Metering Screw |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA6-NC | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
| Starglas FX05032 | Eurostar Engineering Plastics | PE, Unspecified | Starglas |
| Ferro PP LPP35BC81NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| LNP™ STAT-KON™ FX98501 compound | SABIC Innovative Plastics | PE, Unspecified | LNP™ STAT-KON™ |
| Daelim Po1y® XP3300EN | DAELIM INDUSTRIAL CO., LTD. | mLLDPE | Daelim Po1y® |
