Order Products : sales@su-jiao.com

NuSil CV-2943

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bxCGYH_NuSil-CV-2943.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.2 W/m-K, Primed Lap Shear 475 psi (3.3 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 1.2 W/m-K, Primed Lap Shear 475 psi (3.3 MPa)

General Information
Features	Low to No Outgassing Thermally Conductive
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	1.3E-4	cm/cm/°C
Thermal Conductivity	1.2	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.20

Additional Information	Nominal Value	Unit
Cure System	Alkoxy

Uncured Properties	Nominal Value	Unit
Color	Grey
Density	2.54	g/cm³
Curing Time (23°C)	1.7E+2	hr
Pot Life	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	90
Lap Shear Strength ¹	3.28	MPa
Tensile Strength	5.17	MPa
Tensile Elongation at Break	35	%
Tear Strength	15.8	kN/m

Note Message
1 .	Primed with SP-130

Resin Grade	Manufacturer	Category	Trademark
Ravamid® AGF30 BK	Ravago Group	Nylon 66	Ravamid®
CompaDur® 121 GF 30 black (027)	DimeLika Plast GmbH	PBT	CompaDur®
Cogegum® AFR/765-UV	Solvay Specialty Polymers	Polyolefin, Unspecified	Cogegum®
Kazan HDPE 293-4-7O1K	Kazanorgsintez Joint Stock Company	HDPE	Kazan HDPE
OPTODYNE™ UV-1100	DAIKIN AMERICA, INC.	Epoxy	OPTODYNE™