Order Products : sales@su-jiao.com
TECHNYL STAR™ S 216 V35 NATURAL
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Solvay Engineering Plastics |
| Trademark: | TECHNYL STAR™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bx4ElR_TECHNYL-STAR-S-216-V35-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TECHNYLSTAR polyamide, reinforced with 35% of glass fibre, for injection moulding. Characterized by a high fluidity of the melt. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.41 | -- | g/cm³ | ISO 1183/A |
| Water Absorption (23°C, 24 hr) | 0.90 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 10700 | 7400 | MPa | ISO 527-2/1A |
| Tensile Stress (Break) | 195 | 115 | MPa | ISO 527-2/1A |
| Tensile Strain (Break) | 3.0 | 5.5 | % | ISO 527-2/1A |
| Flexural Modulus | 10000 | 6200 | MPa | ISO 178 |
| Flexural Stress | 295 | 195 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 13 | 19 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 75 | 80 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | 13 | 16 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | 75 | 80 | kJ/m² | ISO 180 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature | 222 | -- | °C | ISO 11357-3 |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 220 - 225 | °C | |
| Middle Temperature | 225 - 235 | °C | |
| Front Temperature | 235 - 245 | °C | |
| Mold Temperature | 80.0 | °C |
| Injection instructions |
|---|
| Spiral length vs standard PA: 200% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANBLEND P AP2060 F30 | Polykemi AB | PBT+ASA | SCANBLEND P |
| SEPTON™ 8076 | Kuraray Co., Ltd. | SEBS | SEPTON™ |
| Abstron KU603 | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Kepital® F25-63 | KEP Americas | Acetal (POM) Copolymer | Kepital® |
| Plaskon ALP-2 (197) | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
