Order Products : sales@su-jiao.com
INEOS LLDPE LL6930AA
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | INEOS LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bwtfH6_INEOS-LLDPE-LL6930AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLDPE film products Applications: LL6930AA is a high rigidity cast film grade suitable as an anticling layer in co-extruded stretch film structures and for hygienic film. Benefits and Features: LL6930AA is a linear low density polyethylene copolymer containing hexene (C6) as the co-monomer. It offers the following properties:
If corona treatment is necessary, the level should normally be in the range 38-48 mN/m. We recommend that you consult your INEOS O&P Europe technical representative for further advice on the use of LL6930AA. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.936 | g/cm³ | ISO 1183/D |
| Melt Mass-Flow Rate (MFR) (190°C/0.325 kg) | 3.5 | g/10 min | ISO 1133 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| Tensile Modulus - 1% Secant (38 µm, Blown Film) | 300 | MPa | ISO 1184 |
| Tensile Strength | ISO 527-3 | ||
| MD : 38 µm, Blown Film | 55.0 | MPa | |
| TD : 38 µm, Blown Film | 55.0 | MPa | |
| Tensile Elongation | ISO 1184 | ||
| MD : Break, 38 µm, Blown Film | 600 | % | |
| TD : Break, 38 µm, Blown Film | 600 | % | |
| Dart Drop Impact (38 µm, Blown Film) | 50 | g | ASTM D1709A |
| Elmendorf Tear Strength 2 | ASTM D1922 | ||
| MD : 38.0 µm | 11.8 | kN/m | |
| TD : 38.0 µm | 15.7 | kN/m |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 38.0 µm, Blown Film) | 80 | ASTM D2457 | |
| Haze (38.0 µm, Blown Film) | 5.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 240 to 280 | °C |
| Note Message | |
|---|---|
| 1 . | Conditioned according to ISO 1872/1 |
| 2 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT GP1001S | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| Spartech Polycom PP6225R E49 | Spartech Polycom | PP, Unspecified | Spartech |
| DOMAMID® A1-008-V30-H2-DB | DOMO Engineering Plastics GmbH | Nylon 6 | DOMAMID® |
| EPLAMID 66 GFS 30 HS NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| Hanwha Total PP BJ352 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
