Order Products : sales@su-jiao.com
Therma-Tech™ TT9200-5003 EC Grey
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Therma-Tech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bwBMuT_Therma-Tech-TT9200-5003-EC-Grey.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Therma-Tech™ Thermal Management Compounds have been engineered to combine the heat transfer and cooling capabilities of metals with the design freedom, weight reduction and cost advantages of thermoplastics. These materials provide the benefits of proprietary conductive additive technologies and the performance of select engineering thermoplastic resins. Therma-Tech compounds have been shown to improve thermal conductivity up to 100-times that of conventional plastics and can be used in a wide range of thermal management applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.78 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (Injection Molded) | 0.20 to 0.40 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 17500 | MPa | ISO 527 |
| Tensile Stress (Break) | 58.0 | MPa | ISO 527-2/1/50 |
| Tensile Elongation 2(Break) | 0.30 to 0.50 | % | ISO 527 |
| Flexural Modulus 3(Injection Molded) | 13500 | MPa | ISO 178 |
| Flexural Strength 4(Injection Molded) | 75.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.3 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 3.9 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Annealed) | 260 | °C | ISO 75-2/A |
| Thermal Conductivity | |||
| 23°C 5 | 2.2 to 2.6 | W/m/K | ISO 8302 |
| 23°C 6 | 3.5 to 4.0 | W/m/K | ASTM E1461 |
| 23°C 7 | 16 to 18 | W/m/K | ASTM E1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+4 | ohms | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | 5VA | ||
| 3.00 mm | 5VA | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 0.800 mm | 960 | °C | |
| 1.60 mm | 960 | °C | |
| 3.00 mm | > 960 | °C | |
| Glow Wire Ignition Temperature (3.00 mm) | > 960 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 310 to 340 | °C | |
| Mold Temperature | 140 to 170 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 1.0 mm/min |
| 2 . | Type I, 50 mm/min |
| 3 . | 10 mm/min |
| 4 . | 10 mm/min |
| 5 . | Through Plane with Modified Transient Plane Source technique, C-Therm TCi™ |
| 6 . | Through-Plane |
| 7 . | In-Plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 3403-3 | RTP Company | LCP | RTP |
| Miraprene® QS2215 | Mitsubishi Chemical Corporation | TPO (POE) | Miraprene® |
| Di-Pak™ E-4670-3 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| DuraElast 1730-71 | Evermore Chemical Industry Co., Ltd. | TPU-Polyester | DuraElast |
| MAJORIS EE265 GRIS 8683/FZH | AD majoris | PP, Unspecified | MAJORIS |
