Order Products : sales@su-jiao.com
Stat-Rite® M809
| Category: | Acrylic, Unspecified , Acrylic |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Stat-Rite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bw6GHe_Stat-Rite-M809.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Stat-Rite® M809 is a static dissipative acrylic alloy. Stat-Rite® M809 utilizes the patented Stat-Rite inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protection. Stat-Rite® IDP alloys provide consistent static dissipation even when extruded, injection molded or thermoformed into components. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1450 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 30 | % | ASTM D638 |
| Flexural Modulus | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 75.0 | °C | |
| 1.8 MPa, Unannealed | 67.0 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | |||
| -- 1 | 1.0E+10 | ohms | ASTM D257 |
| -- 2 | 6.0E+9 | ohms | ESD S11.11 |
| Volume Resistivity | 4.0E+10 | ohms·cm | ASTM D257 |
| Static Decay - +1000 V to 10 V 3 | < 1.0 | sec |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ionic Content | Internal Method | ||
| Anions Cl- | 20.0 | ng/cm² | |
| Anions NO3- | 4.00 | ng/cm² | |
| Anions PO4- | 15.0 | ng/cm² | |
| Anions SO4- | 15.0 | ng/cm² | |
| Cations Na+ | 200 | ng/cm² | |
| Outgassing | Internal Method | ||
| MMA | 40.0 | µg/g | |
| Styrene | 15.0 | µg/g | |
| Toluene | 180 | µg/g | |
| Total Organics | 250 | µg/g |
| Note Message | |
|---|---|
| 1 . | 50% RH |
| 2 . | 12% RH |
| 3 . | CPM, 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Baoding 67I64D | Baoding Bangtai Polymeric New-Materials Co.,Ltd | TPU-Polyester | Baoding |
| Elastollan® SP 883 | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| ENGAGE™ 8842 | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
| Keltan® 8550 | LANXESS Buna GmbH | EPDM | Keltan® |
| LEXAN™ LUX9136C resin | SABIC Innovative Plastics | PC | LEXAN™ |
