Order Products : sales@su-jiao.com

THERMOLAST® K TF8STE (Series: FC/CS)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® K
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bw4MdG_THERMOLAST-K-TF8STE-Series-FC-CS-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The FC/CS Series is your material solution for applications with food contact providing an excellent compression set. The series is available in translucent colors.

Typical applications

Closures

Flexible Connections

Household articles

Membranes

Packaging (for food and careproducts)

Seals

Valves

Material advantages

Adhesion to PP

Applications with food contact

Code of Federal Regulations, Title 21 (CFR 21) "FDA"

Easy coloring (compounds in natural colors)

EN71/3

Excellent mechanical properties

For injection molding and extrusion

High elasticity

Perfect surface finish

Recyclable

Regulation (EU) No. 10/2011

Service temperature: -40°C to+120°C (dynamic stress: up to 100°C)

General Information
Features	Food Contact Acceptable High Elasticity Outstanding Surface Finish Recyclable Material
Uses	Closures Connectors Food Packaging Household Goods Membranes Non-specific Food Applications Packaging Seals Valves/Valve Parts
Agency Ratings	EN 71-3 EU 10/2011 FDA Food Contact, Unspecified Rating
Appearance	Translucent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.890	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	83		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	14.5	MPa	ISO 37
Tensile Elongation ²(Break)	700	%	ISO 37
Tear Strength ³	35	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	44	%
70°C, 24 hr	66	%
100°C, 24 hr	75	%

Extrusion	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	180	°C
Cylinder Zone 3 Temp.	200	°C
Die Temperature	200 to 230	°C

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
NILAMID® A2 HH M25	Nilit Plastics	Nylon 66	NILAMID®
Niretan B C35	Soredi S.p.a.	Nylon 6	Niretan B
DENITER 3010	Vamp Tech	PBT	DENITER
EPO-TEK® 320	Epoxy Technology Inc.	Epoxy	EPO-TEK®
MAJORIS IB910	AD majoris	PP, Unspecified	MAJORIS