Order Products : sales@su-jiao.com
Isocor™ 653
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Shakespeare Monofilaments and Specialty Polymers |
| Trademark: | Isocor™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bvwFfb_Isocor-653.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Isocor™ 653 multi-polymer is a linear polyamide with unique solubility characteristics and physical properties. Isocor™ 653 is easily processed and has a wide range of applications due to its physical properties, chemical resistance, and lower melt temperatures. Typical applications for Isocor™ 653 include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.08 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.5 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 3.5 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Durometer Hardness (Shore D) | 73 | 65 | ASTM D2240 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | 24.8 | 18.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | 350 | % | ASTM D638 |
| Flexural Modulus | 621 | 207 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 43 | 27 | J/m | ASTM D256 |
| 23°C | 160 J/m | No Break | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature | 154 | -- | °C | DSC |
| Injection | Dry | Unit | |
|---|---|---|---|
| Dew Point | < -17.8 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Hopper Temperature | 60.0 | °C | |
| Rear Temperature | 143 - 154 | °C | |
| Middle Temperature | 149 - 160 | °C | |
| Front Temperature | 154 - 166 | °C | |
| Nozzle Temperature | 143 - 154 | °C | |
| Processing (Melt) Temp | 143 - 154 | °C | |
| Mold Temperature | 10.0 - 93.3 | °C | |
| Injection Pressure | 3.45 - 13.8 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 | MPa |
| Extrusion | Dry | Unit | |
|---|---|---|---|
| Suggested Max Moisture | 0.10 | % | |
| Hopper Temperature | 79.4 | °C | |
| Cylinder Zone 1 Temp. | 218 | °C | |
| Cylinder Zone 2 Temp. | 246 | °C | |
| Cylinder Zone 3 Temp. | 246 | °C | |
| Cylinder Zone 4 Temp. | 246 | °C | |
| Die Temperature | 229 | °C |
| Extrusion instructions |
|---|
| Flange: 445°F (229°C)Air Dew Point (max): 0°F (-18°C)Neck: 445°F (229°C)Head: 445°F (229°C)Pump: 445°F (229°C) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMTAL PM1419 | Polyram Ram-On Industries | Acetal (POM) Copolymer | RAMTAL |
| Surlyn® 7940 | DuPont Packaging & Industrial Polymers | EMAA | Surlyn® |
| Tarnoform® 300 CI2 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| VITAMIDE® BB74BK6578 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| CP PRYME® Polyethylene PE100LLD-20M | Chase Plastics Services Inc. | LLDPE | CP PRYME® Polyethylene |
