| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bvWqbH_PRIMALLOY-B1700.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| PRIMALLOY® B1700 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of PRIMALLOY® B1700: Low Hardness. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 0.90 | % | |
| Flow : 2.00 mm | 2.6 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 68 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 10.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 750 | % | ISO 37 |
| Tear Strength | 41 | kN/m | ISO 34-1 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLON T 015 UV - transparent | POLYMA Kunststoff GmbH & Co. KG | PC | POLYLON |
| Bergadur™ PB40 G10 HS BK011 | PolyOne Corporation | PBT | Bergadur™ |
| INEOS LDPE 23L430B | INEOS Olefins & Polymers Europe | LDPE | INEOS LDPE |
| ICORENE® 9035 | ICO Polymers APAC, A Division of A. Schulman | LMDPE | ICORENE® |
| LNP™ COLORCOMP™ 310C compound | SABIC Innovative Plastics | PBT | LNP™ COLORCOMP™ |