Order Products : sales@su-jiao.com
DENILUB Z 30G 3TF
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | brffD5_DENILUB-Z-30G-3TF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPA 30% glass fiber reinforced with PTFE. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 12000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 175 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.33 | ||
| Static | 0.28 | ||
| Wear Factor 1 | 25.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 7.0 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 45 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 280 | °C | ASTM D648A |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3870 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| REPOL® AM650N | Reliance Industries Limited | PP Homopolymer | REPOL® |
| Rotec® ASA E 310 | ROMIRA GmbH | ASA | Rotec® ASA |
| Andur AL 95 AP/Curene® 111 | Anderson Development Company | PUR-Eth,aliphat | Andur |
| LOXIM 820 01 HBCC | LOXIM Industries Private Limited | PP, Unspecified | LOXIM |
