Order Products : sales@su-jiao.com
Quadrant EPP LDPE
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bnvr9B_Quadrant-EPP-LDPE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Quadrant EPP LDPE is a low density polyethylene product,. It is available in North America. Typical application areas are: food contact applications. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | < 0.010 | % | ASTM D570 |
| Saturation | < 0.010 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 393 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 11.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Flexural Modulus | 200 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 10.3 | MPa | ASTM D790 |
| Compressive Modulus | 393 | MPa | ASTM D695 |
| Compressive Strength (10% Strain, 23°C) | 9.65 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Maximum Use Temperature - Long Term, Air | 71 | °C | |
| Peak Crystallization Temperature (DSC) | 110 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAMID™ TA631 | Mando Advanced Materials Co., Ltd. | Nylon 66 | TEKAMID™ |
| Zhongfa PP ZF-T40 | Yuyao Zhongfa Engineering Plastics Co. Ltd. | PP, Unspecified | Zhongfa |
| Edistir® N 1840 | Versalis S.p.A. | PS (GPPS) | Edistir® |
| LTP LTP8275 | Chengdu Letian Plastics Co., Ltd | PPS | LTP |
| OTECH ALLOY OL4617 - Profile | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
