Category: | TPV , Thermoplastic Vulcanizate |
Manufacturer: | RTP Company |
Trademark: | RTP |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | bnafn0_RTP-2800-B-70A-Z.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. 70 Shore A - FDA Compliant Ingredients |
General Information | |
---|---|
RoHS Compliance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow (3.20 mm) | 1.4 - 1.6 | % | ASTM D955 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore A, 10 sec) | 75 | ASTM D2240 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 1(Break, 3.20 mm) | 4.83 | MPa | ASTM D412 |
Tensile Elongation 2(Break) | 350 | % | ASTM D412 |
Tear Strength 3 | 17.5 | kN/m | ASTM D624 |
Additional Information |
---|
FDA Compliant IngredientsMoisture Content: <0.08% |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 79.4 | °C | |
Drying Time | 3.0 - 4.0 | hr | |
Processing (Melt) Temp | 199 - 210 | °C | |
Mold Temperature | 10.0 - 79.4 | °C | |
Injection Pressure | 68.9 - 138 | MPa |
Note Message | |
---|---|
1 . | C mold, 500 mm/min |
2 . | Mouth die C, 500 mm/min |
3 . | C mould |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 205.3 L | RTP Company | Nylon 66 | RTP |
Sarlink® TPV 2464 | Teknor Apex Company | TPV | Sarlink® TPV |
Andur 9-5 APLF | Anderson Development Company | PUR-Ester/TDI | Andur |
Diamond ASA S225 LG | Network Polymers, Inc. | ASA | Diamond ASA |
LONGLITE® PBT 6030-200X | CCP Group | PC+PBT | LONGLITE® PBT |