Order Products : sales@su-jiao.com
Lotrène® LDPE MG70
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | QAPCO |
| Trademark: | Lotrène® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bgu2fq_Lotr-ne-LDPE-MG70.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lotrène® LDPE MG70 is a Low Density Polyethylene product. It can be processed by injection molding and is available in Africa & Middle East or Europe. Applications of Lotrène® LDPE MG70 include additive/masterbatch, coating applications, engineering/industrial parts and food contact applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.5 to 2.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 6.00 | MPa | |
| Break | 10.0 | MPa | |
| Tensile Elongation (Break) | 200 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 78.0 | °C | ASTM D1525 |
| Peak Crystallization Temperature (DSC) | 101 | °C | ASTM E794 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 150 to 170 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NILAMID® A3 GF30 TM2 | Nilit Plastics | Nylon 66 | NILAMID® |
| NuSil CV3-1161 | NuSil Technology | Silicone | NuSil |
| LUVOCOM® 1-8260 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| Plexar® PX2246 | LyondellBasell Industries | HDPE | Plexar® |
| Braskem PE CP 396XP | Braskem | PP Impact Copolymer | Braskem PE |
