Order Products : sales@su-jiao.com
Latigray 82-04 CX/90
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Latigray |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bgKlgQ_Latigray-82-04-CX-90.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Radiopaque compound based on Polyamide 12 (PA12). Special mineral filler. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 4.26 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.70 to 1.1 | % | |
| Flow : 2.00 mm | 0.70 to 1.1 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 9700 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C) | 35.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 0.80 | % | ISO 527-2/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 15 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 170 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 110 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 165 | °C | ISO 306/B50 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| X-Ray Opacity | |||
| HVT at 120 kV | 660.0 | µm | |
| HVT at 80 kV | 340.0 | µm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 100 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 250 to 270 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | 60 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polypropylene C7038-38NA | Trinseo | PP Impact Copolymer | Polypropylene |
| PrimoPrene 60A-1000 | KMI Group Inc. | TPV | PrimoPrene |
| Sylvin 8857-60D Natural | Sylvin Technologies Incorporated | PVC, Semi-Rigid | Sylvin |
| MOSTEN GB 506 | UNIPETROL RPA | PP Impact Copolymer | MOSTEN |
| VALOX™ K4530 resin | SABIC Innovative Plastics | PBT | VALOX™ |
