Order Products : sales@su-jiao.com
EPLAMID 6 CFR 20 NC
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | EPSAN Plastik SAN. ve TiC. A.S. |
| Trademark: | EPLAMID 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bebx1C_EPLAMID-6-CFR-20-NC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyamide 66, reinforced with 20 % of carbon fiber, heat stabilized, lubricated for injection moulding. Eplamid 6 CFR 20 is used in all sectors of industry, offering a perfect balance of thermal and mechanical properties. This product is available in natural and in colours on request. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.23 - 1.27 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction : 3.00mm | 0.80 | % | ISO 294-4 |
| Flow direction : 3.00mm | 0.30 | % | ISO 294-4 |
| Moisture Content | 0.20 | % | ISO 15512 |
| Ash content- CARBON FIBER (550°C -10 min) | 20.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 23°C) | 84 - 88 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6500 - 7500 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 120 - 150 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 2.0 - 4.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 6000 - 7000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 130 - 160 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 - 9.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (23°C) | 6.0 - 9.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 200 - 230 | °C | ISO 3146 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Additional Information |
|---|
| TEST CONDITIONS: Laboratory conditions are 23 ±2°C and 45-55 % RH. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 260 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 302 EM | RTP Company | PC | RTP |
| Sindustris PBT GP2157FT | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| ChronoPrene™ 75A | AdvanSource Biomaterials Corp. | TPE | ChronoPrene™ |
| Isocor™ TT65SI | Shakespeare Monofilaments and Specialty Polymers | Nylon 6 | Isocor™ |
| MAJORIS FT365 - 8479 | AD majoris | PP, Unspecified | MAJORIS |
