Order Products : sales@su-jiao.com
RTP 400 HI Z
| Category: | PS Alloy , Polystyrene Alloy |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bZO8R5_RTP-400-HI-Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2690 | MPa | ASTM D638 |
| Tensile Strength | 17.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 2070 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 36.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 96 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 530 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 93.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 77.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 204 - 238 | °C | |
| Middle Temperature | 204 - 238 | °C | |
| Front Temperature | 204 - 238 | °C | |
| Mold Temperature | 38.0 - 66.0 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravago Compounds HMP-8460 | Ravago Manufacturing Americas, LLC | LLDPE | Ravago Compounds |
| Starflam AFR200Y | Eurostar Engineering Plastics | Nylon 66 | Starflam |
| Texin® STX | Covestro - PUR | PUR, Unspecified | Texin® |
| Ultraform® W 2320 0035 LEV | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| REV Materials 8011-002 | REV Materials | PP, Unspecified | REV Materials |
