Order Products : sales@su-jiao.com
PRIMALENE WPP611M
| Category: | mLLDPE , Metallocene Linear Low Density Polyethylene |
| Manufacturer: | Southern Polymer, Inc. |
| Trademark: | PRIMALENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bYVSuZ_PRIMALENE-WPP611M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A metallocene linear low density polyethylene Applications: - Seal layer in coextrusions
Features:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.4 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | > 1.0 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD | 167 | MPa | |
| 1% Secant, TD | 182 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 13.6 | MPa | |
| TD : Yield | 10.3 | MPa | |
| MD : Break | 52.4 | MPa | |
| TD : Break | 51.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 480 | % | |
| TD : Break | 590 | % | |
| Dart Drop Impact | 1100 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 230 | g | |
| TD | 500 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 135 | ASTM D2457 | |
| Haze | 4.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FL 23 | Versalis S.p.A. | LDPE | Riblene® |
| Silplus® 60 CW | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| NITRIFLEX N-6420 | NITRIFLEX | PVC+NBR | NITRIFLEX |
| ESTABLEND 6500 F | Cossa Polimeri S.r.l. | PC+ABS | ESTABLEND |
| Lifolit® SG 60.0515/1 | ELASTO | PVC, Flexible | Lifolit® |
