Order Products : sales@su-jiao.com
Chemlon® 340 G
| Category: | Nylon 610 , Polyamide 610 |
| Manufacturer: | Teknor Apex Company (Chem Polymer) |
| Trademark: | Chemlon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bYCtTE_Chemlon-340-G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Chemlon® 340 G is a Polyamide 610 (Nylon 610) material filled with glass fiber. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Chemlon® 340 G: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/5.0 kg) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 165 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 2.5 | % | |
| Break | 2.7 | % | |
| Flexural Modulus | 9140 | MPa | ASTM D790 |
| Flexural Strength | 241 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 160 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 211 | °C | ASTM D648 |
| Melting Temperature | 223 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.810 mm) | HB | UL 94 | |
| Oxygen Index | 25 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 235 to 252 | °C | |
| Middle Temperature | 246 to 268 | °C | |
| Front Temperature | 257 to 274 | °C | |
| Nozzle Temperature | 252 to 279 | °C | |
| Processing (Melt) Temp | 252 to 277 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRILOY AC3250 | Formosa Plastics Corporation | PC+ABS | TAIRILOY |
| Ablebond 85-1 | Henkel Ablestik | Epoxy | Ablebond |
| Altuglas® BS 440 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| POLYFLAM® HSF 33 E | A. Schulman Europe | PS (GPPS) | POLYFLAM® |
| Vyncolit® TX10916/5 | SBHPP | Phenolic | Vyncolit® |
