Order Products : sales@su-jiao.com
NYCOA Polyamide 2037
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bVh9rX_NYCOA-Polyamide-2037.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 2037 is a 15% glass fiber reinforced, impact modified and heat stabilized Nylon 6 resin that features good mechanical properties with improved impact strength and dimensional stability. NYCOA 2037 has excellent chemical resistance to greases, oils and other hydrocarbons. It is available in light stable grades and custom colors. Typical applications include power tool housings, safety helmet parts, and weed trimmer heads. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.40 | % | ASTM D955 |
| Transverse flow | 0.80 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.4 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 120 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 4.0 | % | ASTM D638 |
| Flexural Modulus 3 | 5050 | MPa | ASTM D790 |
| Flexural Strength 4 | 150 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 160 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 220 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 203 | °C | ASTM D648 |
| Melting Temperature | 221 | °C | DSC |
| Additional Information |
|---|
| The value listed as Melting Point DSC, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEN-281MC65 | SHIN-A T&C | Epoxy | SHIN-A |
| TEKNIFLEX® Pouch MS4812 | Tekni-Films, a div of Tekni-Plex | Film, MG Paper/LDPE/Al Foil/Surlyn | TEKNIFLEX® Pouch |
| Arnitel® EL740-H/A | DSM Engineering Plastics | TPC-ET | Arnitel® |
| Delrin® PC690 NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Polifor® L6 GF/30 NATURALE | SO.F.TER. SPA | PP Homopolymer | Polifor® |
