Order Products : sales@su-jiao.com
TechnoFin HDPE-4
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoFin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bSRBm3_TechnoFin-HDPE-4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TechnoFin compounds with variable flow behaviour, good workability, possess good damping characteristics, high rigidity and very good abrasion behaviour. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) | 4.00 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1400 | MPa | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 12 | kJ/m² | ISO 179/1eA |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+3 | ohms·cm | IEC 60093 |
| Additional Information |
|---|
| Charpy Notched Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A: >12 kJ/m²Volume Resistivity, IEC 60093: <1e3 ohm-cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 230 - 270 | °C | |
| Mold Temperature | 30.0 - 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Supol HT345E | LyondellBasell Industries | PP Copolymer | Supol |
| Wellamid® MR410 22H-GY1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| TRIREX® 3025U(E) | Samyang Corporation | PC | TRIREX® |
| Arnite® TV4 640 | DSM Engineering Plastics | PC+PBT | Arnite® |
| Cogegum® GFR/320 | Solvay Specialty Polymers | Polyolefin, Unspecified | Cogegum® |
