Order Products : sales@su-jiao.com

Nylene® 601

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bRevGW_Nylene-601.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing

Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance

Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

General Information
Additive	Heat Stabilizer
Features	Fatigue Resistant General Purpose Good Electrical Properties Good Toughness Heat Stabilized Medium Viscosity
Uses	General Purpose Pressed Slabs Rods Tubing Wire Jacketing
Processing Method	Casting Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.14	g/cm³	ASTM D792

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	82.7	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	70	%	ASTM D638

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	37	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	175	°C
1.8 MPa, Unannealed	75.0	°C

Flammability	Nominal Value		Test Method
Flame Rating (1.47 mm)	V-2		UL 94

Extrusion	Nominal Value	Unit
Melt Temperature	249 to 260	°C

Resin Grade	Manufacturer	Category	Trademark
NYLOY® M-0030N-V	Nytex Composites Co., Ltd.	Nylon 66	NYLOY®
Europrene Latice® 5570	Versalis S.p.A.	SBR, Emulsion	Europrene Latice®
Kingfa FRHIPS-960PC	Kingfa	PS (HIPS)	Kingfa
OmniCarb™ PC 114 HSV	OMNI Plastics, LLC	PC	OmniCarb™
ULTEM™ 1110 resin	SABIC Innovative Plastics	PEI	ULTEM™