Order Products : sales@su-jiao.com
Hyril® GP355AS
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | Entec Polymers |
| Trademark: | Hyril® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bRDTYk_Hyril-GP355AS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hyril®GP355AS is a styrene propylene (SAN) material,. This product is available in North America and is processed by extrusion. Hyril®The main characteristics of the GP355AS are: copolymer. Hyril®The typical application fields of GP355AS are: automobile industry |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.70 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 125 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 71.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.5 | % | ASTM D638 |
| Flexural Modulus (23°C) | 3870 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 123 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 96.7 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 85.6 | °C | ASTM D648 |
| Vicat Softening Temperature | 108 | °C | ASTM D1525 1 |
| CLTE - Flow | 5.9E-5 | cm/cm/°C | ASTM D696 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 89.0 | % | ASTM D1003 |
| Haze | 0.60 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 - 82.2 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.60 | % | |
| Cylinder Zone 1 Temp. | 162 - 191 | °C | |
| Cylinder Zone 3 Temp. | 204 - 232 | °C | |
| Die Temperature | 232 - 246 | °C | |
| Take-Off Roll | 10.0 - 87.8 | °C |
| Extrusion instructions |
|---|
| Feed Zone: Water Cooled |
| Note Message | |
|---|---|
| 1 . | 标准 B (120°C/h), 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Teflon® PFA TE9724 | DuPont Fluoropolymers | PFA | Teflon® PFA |
| Sylvin 8672-65 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| VINIKA® CA65NA | Mitsubishi Chemical Performance Polymers, Inc. | PVC, Flexible | VINIKA® |
| Gebablend 65 | geba Kunststoffcompounds GmbH | PC+ABS | Gebablend |
| ULTEM™ CRS5111 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
