Order Products : sales@su-jiao.com
SUSTAMID 46
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | Röchling Sustaplast SE & Co. KG |
| Trademark: | SUSTAMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bOaRI3_SUSTAMID-46.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Product characteristics
Typical fields of application
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 3.7 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 84 | ISO 868 | |
| Ball Indentation Hardness | 168 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3100 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 95.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 30 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 6.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 160 | °C | ISO 75-2/A |
| Continuous Use Temperature | |||
| -- 1 | -40.0 to 135 | °C | |
| -- 2 | < 200 | °C | |
| Melting Temperature | 295 | °C | ISO 11357-3 |
| CLTE - Flow | 8.0E-5 | cm/cm/°C | DIN 53752 |
| Thermal Conductivity | 0.30 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength | 22 | kV/mm | IEC 60243-1 |
| Dielectric Constant | 3.80 | IEC 60250 | |
| Dissipation Factor (50 Hz) | 0.13 | IEC 60250 | |
| Comparative Tracking Index | 400 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | HB | ||
| 6.00 mm | HB |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® MP-3004-HH | Teknor Apex Company | TPE | Monprene® |
| Akulon® S223-DH | DSM Engineering Plastics | Nylon 66 | Akulon® |
| Elastron庐 G P.G101.A45.B | Elastron USA, Inc. | SEBS | Elastron® G |
| Plenco 07556 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| Sylvin 2910-85 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
