Order Products : sales@su-jiao.com
HiFill® PA6 L N MB
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Techmer Engineered Solutions |
| Trademark: | HiFill® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bO10O2_HiFillPA6LNMB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HiFill®PA6 L N MB is a polyamide 6 (nylon 6) product,. It can be processed by injection molding and is available in North America. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.13 | 1.13 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| -- | -- | 1.1 | % | ASTM D955 |
| 3.18 mm | 1.1 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 2.8 | 2.8 | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness | ASTM D785 | |||
| -- | -- | 119 | ASTM D785 | |
| Class r | 119 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Yield) | 90.3 | 49.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 70 | 85 | % | ASTM D638 |
| Flexural Modulus | 2830 | 1100 | MPa | ASTM D790 |
| Flexural Strength | 115 | 46.2 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 48 | 180 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 178 | 178 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 76.7 | 76.7 | °C | ASTM D648 |
| CLTE - Flow | 8.3E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+13 | 13 | ohms·cm | ASTM D257 |
| Dielectric Strength | ASTM D149 | |||
| -- | -- | 18 | kV/mm | ASTM D149 |
| -- 1 | 18 | -- | kV/mm | ASTM D149 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| -- | -- | V-2 | UL 94 | |
| 0.75 mm | V-2 | -- | UL 94 |
| Additional Information | Dry | Conditioned | ||
|---|---|---|---|---|
| TPCI # | 7964102 | -- |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEN-6222MPM70 | SHIN-A T&C | Epoxy | SHIN-A |
| Mowiflex™ FXY 478 | Kuraray Co., Ltd. | PVOH | Mowiflex™ |
| VALOX™ 4012G resin | SABIC Innovative Plastics Europe | PBT | VALOX™ |
| Varcum 29401 | Durez Corporation | Phenolic | Varcum |
| Plexiglas® HT121 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
