Order Products : sales@su-jiao.com
MACOMASS TPE MM-TPE V 3120
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | MACOMASS Verkaufs AG |
| Trademark: | MACOMASS TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bKydTz_MACOMASS-TPE-MM-TPE-V-3120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MACOMASS TPE MM-TPE V 3120 is a Thermoplastic Elastomer (TPE) material. It is available in Europe for injection molding. Important attributes of MACOMASS TPE MM-TPE V 3120 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 to 0.980 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 57 to 63 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 5.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | > 450 | % | ISO 37 |
| Tear Strength | > 10 | kN/m | ISO 34-1 |
| Compression Set | < 44 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 160 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ingeo™ 6100D | NatureWorks® LLC | PLA | Ingeo™ |
| LNP™ STAT-KON™ DEL13PXC compound | SABIC Innovative Plastics Europe | PC | LNP™ STAT-KON™ |
| Optix® CA-1000 IG | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| Sylvin 2900-85 Clear 8382 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ExxonMobil™ LLDPE LL 1001 Series | ExxonMobil Chemical | LLDPE | ExxonMobil™ LLDPE |
