Order Products : sales@su-jiao.com
NYCOA Polyamide 2245
| Category: | Nylon+TPE , Polyamide + TPE |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bKpfWp_NYCOA-Polyamide-2245.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 2245 is a highly flexible Nylon copolymer TPE developed for both injection molding and extrusion applications. The chemical composition of NYCOA 2245 delivers improved impact performance at ambient or low temperatures, and increased flexibility to meet higher impact performance. The high thermal and chemical resistance, inherent to Nylon 6, is retained. The chemistry of the resin promotes good adhesion to olefins and other materials, without the problem of migration associated with the use of plasticizers. In addition, its high melt viscosity and melt strength provides outstanding processability for tubing, profile, sheet, and monofilament. This product is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and custom colors. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.0 | % | ASTM D955 |
| Transverse flow | 1.2 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.1 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 42.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 400 | % | ASTM D638 |
| Flexural Modulus 3 | 448 | MPa | ASTM D790 |
| Flexural Strength 4 | 20.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 750 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 205 | °C | DSC |
| Additional Information |
|---|
| The value listed as Melting Point DSC, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FC 39 | Versalis S.p.A. | LDPE | Riblene® |
| RheTech Polypropylene GC30P105-08FA | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| DENILUB B 00U 1Si | Vamp Tech | PBT | DENILUB |
| Okirol® E-3F | DIOKI d.d. | PS (EPS) | Okirol® |
| SABIC® HDPE M453G | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
