Order Products : sales@su-jiao.com

Thermoset Plastics SC-113

Category:	Silicone , Silicone
Manufacturer:	Thermoset, Lord Chemical Products
Trademark:	Thermoset Plastics
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bHawLg_Thermoset-Plastics-SC-113.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Thermoset Plastics SC-113 is a Silicone material. It is available in North America for casting, coating, or encapsulating.

Important attributes of Thermoset Plastics SC-113 are:

Conductive

Insulating

Typical applications include:

Coating Applications

Sealing Applications

Wire & Cable

General Information
Features	Electrically Insulating Thermally Conductive
Uses	Coating Applications Electronic Insulation Sealants
Appearance	Grey
Forms	Liquid
Processing Method	Casting Coating Encapsulating

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.908	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	27		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	2.34	MPa	ASTM D638
Tensile Elongation (Yield)	520	%	ASTM D638

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.6E+15	ohms·cm	ASTM D257
Dielectric Constant			ASTM D150
100 Hz	2.84
100 kHz	2.91
Dissipation Factor			ASTM D150
100 Hz	1.6E-3
100 kHz	2.1E-3

Thermoset	Nominal Value	Unit	Test Method
Shelf Life (25°C)	26	wk
Thermoset Mix Viscosity (25°C)	35000	cP	ASTM D2393
Demold Time (25°C)	1400	min

Resin Grade	Manufacturer	Category	Trademark
Ravaflex EPDM	Ravago Group	EPDM	Ravaflex
Radilon® A VHS 338 M NER	Radici Plastics	Nylon 66	Radilon®
SLOVALEN® PH 92 T 30	Plastcom	PP, Unspecified	SLOVALEN®
Durez® 33488	Sumitomo Bakelite North America, Inc.	Phenolic	Durez®
KMI PP KM-099IB	KMI Group, Inc.	PP Impact Copolymer	KMI PP