Order Products : sales@su-jiao.com
Bergamid™ A700
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Bergamid™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bEBctt_Bergamid-A700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bergamid™ A700 is a Polyamide 66 (Nylon 66) product. It can be processed by extrusion or injection molding and is available in Asia Pacific, Europe, or North America. Characteristics include:
|
| General Information | |
|---|---|
| RoHS Compliance |
|
| UL File Number |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density 1 | 1.13 | -- | g/cm³ | DIN 53479 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 8.5 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.8 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus 2(23°C) | 3200 | 1600 | MPa | ISO 527-2/1 |
| Tensile Stress 3(Yield, 23°C) | 80.0 | 60.0 | MPa | ISO 527-2/50 |
| Tensile Strain 4(Yield, 23°C) | 4.5 | 25 | % | ISO 527-2/50 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 4.0 | -- | kJ/m² | |
| 23°C | 6.0 | 25 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | -- | ||
| 23°C | No Break | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 220 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 80.0 | -- | °C | ISO 75-2/A |
| Maximum Use Temperature | IEC 60216 | |||
| -- 5 | 90 | -- | °C | |
| Short Time | 200 | -- | °C | |
| Melting Temperature (DSC) | 261 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength | 120 | 80 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 3.60 | 5.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.026 | 0.20 | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.420 to 3.00 mm) | V-2 | V-2 | UL 94 | |
| Glow Wire Flammability Index 6(0.800 mm) | 750 | -- | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature 7(0.800 mm) | 675 | -- | °C | IEC 60695-2-13 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time - Desiccant Dryer | 4.0 to 8.0 | hr | |
| Processing (Melt) Temp | 270 to 290 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Back Pressure | 50.0 to 100 | MPa |
| Note Message | |
|---|---|
| 1 . | ±0.02 g/cm³ |
| 2 . | dry as moulded |
| 3 . | dry as moulded |
| 4 . | dry as moulded |
| 5 . | Continuous (GTP 50% Tensile) |
| 6 . | Typical property for uncolored material, not to be contrued as specification |
| 7 . | Typical property for uncolored material; not to be contrued as specification |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC LDPE XJ800 | Lotte Chemical Corporation | LDPE | SEETEC LDPE |
| Borealis PP HC205TF | Borealis AG | PP Homopolymer | Borealis PP |
| CP PRYME® ABS A300 BK | Chase Plastics Services Inc. | ABS | CP PRYME® ABS |
| Emulprene® 1013A | INSA | SBR, Emulsion | Emulprene® |
| 3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 6213 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE Compound |
