Order Products : sales@su-jiao.com
Di-Pak™ R-4528/30
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Hapco Inc. |
| Trademark: | Di-Pak™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bAo98s_Di-Pak-R-4528-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RIGID DI-PAK R-4528 Series A black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.050 to 0.25 | % | ASTM D2566 |
| Weight - per cubic inch | 24 | g |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | 195 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 1.0 to 1.5 | hr | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2900 | MPa | ASTM D638 |
| Tensile Strength | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 0.15 | % | ASTM D638 |
| Flexural Modulus | 3150 | MPa | ASTM D790 |
| Flexural Strength | 55.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 28 | J/m | ASTM D256 |
| Unnotched Izod Impact | 33 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.40 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 7.2E+13 | ohms·cm | ASTM D257 |
| Dielectric Strength | 26 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 4.60 | ||
| 100 kHz | 4.40 | ||
| Dissipation Factor (25°C, 100 kHz) | 0.031 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 11, Mix Ratio by Volume: 20 | ||
| Thermoset Mix Viscosity (25°C) | 5050 | cP | ASTM D4878 |
| Demold Time | |||
| 57°C | 120 to 240 | min | |
| 93°C | 120 to 240 | min |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMV | Arkema | Nylon 11 | Rilsan® |
| Veroplas 660 | PlastxWorld Inc. | ABS | Veroplas |
| FHR EPS 54-5654 | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| Elastron® G G101.A65.B | Elastron USA, Inc. | SEBS | Elastron® G |
| Karina MBU LILAC E 34/160-IE | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
