Order Products : sales@su-jiao.com
SureSpec HD60-70
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | b7eGto_SureSpec-HD60-70.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD60-70 is a Phillips Process Blow Molding certified prime grade designed for containers for packaging of non-aggressive chemicals. HD60-70 features low to medium swell, easy processability in conventional continuous extrusion equipment, good ESCR, good Impact strength, high Stiffness, improved Barrier, and low Odor and Taste. HD60-70 processing temperature is 140 to 165°C., with mold 10 to 30°C. HD60-70 complies with FDA regulation 21CFR 177.520 (c) 3.1(a) + 3.2(a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, molded, F50) | 15.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 710 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 189 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Mold Temperature | 10 - 30 | °C | |
| Blow Molding Temperature | 140 - 165 | °C | |
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2283 TFE 15 | RTP Company | PEEK | RTP |
| Shin-Etsu Elastomer KE-541U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Texalan® 7 Series 772D | Austin Novel Materials Co. Ltd. | TPU Alloy | Texalan® 7 Series |
| Vital-Line SHE5240B | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Vital-Line |
| ICORENE® 2550 YELLOW 2538 | ICO Polymers EMEA, A Division of A. Schulman | LLDPE | ICORENE® |
