Order Products : sales@su-jiao.com
RTP 2209 HF UP
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | b5IAGN_RTP-2209-HF-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.73 | g/cm³ | ISO 1183 |
| Moisture Content | 0.10 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 50 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 19500 | MPa | ISO 527-2 |
| Tensile Stress | 240 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 2.0 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 17000 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 355 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 12 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 65 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties.Desiccant Type Dryer Required. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 150 | °C | |
| Drying Time - Desiccant Dryer | 3.0 | hr | |
| Dew Point | -30.0 | °C | |
| Processing (Melt) Temp | 350 - 400 | °C | |
| Mold Temperature | 160 - 220 | °C | |
| Injection Pressure | 80.0 - 125 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 402 A/B | Wacker Chemie AG | Silicone | POWERSIL® |
| RTP 300 UV L | RTP Company | PC | RTP |
| Prime 5490 WH 41 | Prime PVC® | PVC, Rigid | Prime |
| Solprene® 9618 | Dynasol Elastomers | SBS | Solprene® |
| MARPOL® FS2 | Marco Polo International, Inc. | PS (EPS) | MARPOL® |
